Connector alloy range

Connector alloy range

ILF Limited now carries a range of material specifically for the connector market.

These products are used in a wide range of industries including but not limited to:

  • Information technology
  • Aerospace
  • Fibre optics
  • Telecommunication
  • Automotive
  • Consumer electronics

These products are manufactured by one of the world’s leading producers of connector alloys and sizes range from:

  • Wires from 0.5mm diameter to 8mm diameteter
  • Rods from 1mm diameter x to 200mm diameter
  • Strips width from 6mm to 140mm and gauge from 0.2mm to 3.5mm

Typical applications for these materials include:

  • Contact pins
  • Pin and socket connectors
  • RF connectors
  • corrosion resistant fibre optic connectors

Machinable copper

DesignationTypeENASTMJISAMSTensile strength soft annealed min. N/mm2Tensile Strength Hard max N/mm2Electrical Conductivity % IACSMachinability Free Machining = 100%
C42CuTePCW118CC14500 DPTEN/AC14500 DPTE2004109060
C99CuPb1PCW113CC18700N/AC18700200410≥8560

Other alloys

DesignationTypeENASTMJISAMSTensile strength soft annealed min. N/mm2Tensile Strength Hard max N/mm2Electrical Conductivity % IACSMachinability Free Machining = 100%
CCZCuCr1ZrCW106CC18150 C18200 C18400N/AC18150 C18200 C18400200600≥7530
ECUCu-ETPCW004AC11000C1100C11000200400≥10020
C95CuCrZPbN/AN/AN/AN/A250580≥7590
C96CuNi2SiPbN/AN/AN/AN/A2607503570
C96 SHTCuNi2SiPbN/AN/AN/AN/A2608503570
C97CuNiPb1PN/AC19160N/AC191602506555070
C98MCuNiPb0.6PN/AC19140N/AC191402506555050
C98TCuNiPb0.7PN/AC19150N/AC191502506555050

Machinable brass

DesignationTypeENASTMJISAMSTensile strength soft annealed min. N/mm2Tensile Strength Hard max N/mm2Electrical Conductivity % IACSMachinability Free Machining = 100%
61ACuZn36Pb3CW603NC36000C3601 C3602C3600034061026100
61BCuZn37Pb2CW606NC35300(C3601)C353003206102675
62ACuZn35Pb2CW601NC34500 C35300(C3601)C34500 C353003206102675
62ASCuZn35Pb1CW600NC34000C3501C340003206102670
62BCuZn36Pb1(CW600N)(C34000)(C3501)(C34000)3206102670
62CCuZn36Pb0.5CW604NC33500N/AC335003205702665
PS2CuZn16Si2Pb1N/AC69750N/AC697504409509.590
SwissEcoCuZn40Al Pb <0.01%N/AN/AN/AN/A4406702670

Machinable phosphor bronze

DesignationTypeENASTMJISAMSTensile strength soft annealed min. N/mm2Tensile Strength Hard max N/mm2Electrical Conductivity % IACSMachinability Free Machining = 100%
BZ4CuSn4Pb4Zn4CW456KC54400C5441C544003508201990
B05CuSn13Pb0.5N/AC53800N/AC53800480980960
BP5CuSn5Pb1CW458KC53400C5340C534003408202060

Machinable nickel silver for fibre optic connectors

DesignationTypeENASTMJISAMSTensile strength soft annealed min. N/mm2Tensile Strength Hard max N/mm2Electrical Conductivity % IACSMachinability Free Machining = 100%
NM6CuNi12Zn37Mn6Pb2(CW407J)C79860N/AC79860460840590

If you require further assistance please do not hesitate to contact us at anytime.